MIL-PRF-62528B(AT)
AMERICAN SOCIETY FOR QUALITY (ASQC)
ASQC Z1.4
-
Procedures, Sampling, and Tables for Inspection by
Attributes
(Copies may be obtained from American Society for Quality, 600 North Plankton Avenue,
Milwaukee, WI 53203 or website: https://www.asq.org/.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D522
-
Standard Test Methods for Mandrel Bend Test of Attached
Organic Coatings (DoD Adopted).
ASTM G21
-
Standard Practice for Determining Resistance of Synthetic
Polymeric Materials to Fungi
(Application for copies should be addressed to American Society for Testing and Materials, 100
Barr Harbor Dr., West Conshohocken, PA 19428 or www.astm.org.)
GENERAL MOTORS ENGINEERING STANDARDS
GM9540P
-
Accelerated Corrosion Test.
(Application for copies of GM publications may be obtained from Global Engineering,
7730 Corondelet Avenue, Suite 407, St. Louis, MO 63105 or at website: https://www.ihs.com/.)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.4.
3.2 Materials. Materials shall be as specified herein, in applicable standards and
specifications, and on applicable drawings. Materials not specifically designated shall be
suitable for use in the regulator operating over an ambient temperature range -65 to 215 degrees
Fahrenheit (F) (-53 to 101 degrees Celsius (C)) without any change in physical or dimensional
properties while meeting all performance and environmental requirements of this specification
(see 4.5.4.1).
3.2.1 Hazardous materials. Asbestos, cadmium, and radioactive material (see 6.3.4)
shall not be used in this item.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business