MIL-DTL-13791G
2.3 Non-Government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AEROSPACE INDUSTRIES ASSOCIATION (AIA)
NASM35206
- Screw, Machine Pan Head, Cross-Recessed Carbon Steel,
Cadmium Plated, UNC-2A.
(Copies of these documents are available online at https://www.aia-aerospace.com or from the
Aerospace Industries Association, 1000 Wilson Boulevard, Suite 1700 Arlington, VA 22209-3928
ASTM INTERNATIOINAL (ASTM)
ASTM-B117
- Salt-Spray (Fog) Testing
ASTM-B633
- St an d ar d Sp ecif icat ion f or Elect r od ep osit ed Coat in g s of
Z in c on I r on an d St eel
ASTM-B695
- St an d ar d Sp ecif icat ion f or Coat in g s of Z in c
Mech an ically Dep osit ed on I r on an d St eel
ASTM-G21
- Materials To fungi, Synthetic Polymeric, Determining
Resistance Of
(Copies of these documents are available from https://www.astm.org or ASTM International, P.O. Box
C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
SAE INTERNATIONAL
SAE-AMS-C-81562
- Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically
Deposited)
SAE-AMS-QQ-P-416
- Plating, Cadmium (Electrodeposited)
SAE-AMS2700
- Steels, Passivation of Corrosion Resistant
(Copies of these documents are available online at https://www.sae.org or from the SAE World
Headquarters, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein (except for related specification
sheets), the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheet. In the event of any conflict between the requirements
of this specification and the specification sheet, the latter shall govern.
3.2 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in
accordance with 4.4.
3.2.1 Distributors. Unless otherwise specified (see 6.2), the contractor shall furnish distributors
which shall be subjected to first article inspection (see 4.4). First article inspection samples, properly
marked with identifying information will be representative of the distributors to be furnished to the
Government. All subsequent units delivered to the Government must conform to these samples in all of
their pertinent physical and performance attributes.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business