INCH-POUND
MIL-PRF-62061D
14 August 2009
SUPERSEDING
MIL-PRF-62061C
20 December 1997
PERFORMANCE SPECIFICATION
GENERATOR, ENGINE ACCESSORY: 28 VOLT DC,
RATED OUTPUT 300 AMPERE
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a 28 volt (V) direct current (dc), blower-cooled
generator with rated output of 300 amperes (A) (see 6.1).
1.2 Classification. The generators are classified based on differences in their
configurations as follows:
Configuration A
-
Generator with mechanically driven blower
Configuration B
-
Generator with built in electrically driven blower
Configuration C
-
Generator with mounted electrically driven blower
Configuration D
-
Generator - Air intake Assembly
1.3 Part or Identification Number (PIN). The PIN to be used for generators acquired to
this specification are created as follows (see 3.5.6):
M62061 - X
Type (see 1.2): A - Configuration A
B - Configuration B
C - Configuration C
D - Configuration D
Specification number
Comments, suggestions, or questions on this document should be addressed to U.S. Army Tank-automotive
and Armaments Command, ATTN: RDTA-EN/STND/TRANS MS#268, 6501 E. 11 Mile Road,
Warren, MI 48397-5000 or emailed to DAMI_STANDARDIZATION@conus.army.mil. Since contact
information can change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 2920
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business