MIL-PRF-46795H
2.3 Non-Government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM B117
- Standard Practice for Operating Salt Spray (Fog)
Apparatus (DoD Adopted).
(Application for copies should be addressed to the American Society for Testing and
Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 or website:
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), samples shall be subjected to first article
inspection in accordance with 4.3.
3.2 Materials. Materials used shall be in accordance with the manufacturer s materials
specifications for this type of item. The material shall be free of defects which adversely affect
appearance, performance, or serviceability of the finished product (see 4.6.1).
3.2.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered,
or environmentally preferable materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs (see 4.6.1).
3.2.2 Prohibited material. Asbestos, cadmium, and radioactive materials shall not be
used in this item. Radioactive material is defined by Title 10, CFR, Parts 30 and 40, and other
radioactive material in which the specific activity is greater than 0.002 microcuries per gram or
the activity per item equals or exceeds 0.01 microcuries (see 4.6.1).
3.2.3 Pure tin. The use of pure tin is prohibited. Tin content used in connector materials
shall not exceed 97 percent, and an alloy material shall be chosen to inhibit the growth of tin
whiskers (see 6.4.4).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business