For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-PRF-46795 Generating System: Alternator, Rectifier, 60 Amperes, 28 VoltsThis specification covers 28 volts \(V\), direct current \(dc\) generating systems, engine driven through belt or direct connection, to provide 60 amperes \(A\) for charging and operating loads. The system consists of a rotating field alternator with integral diode rectifier and adjustable voltage regulator in a single housing. This specification also covers repair parts for this system.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12


MIL-PRF-46795H
3.4.13 Sand and dust. Generating system shall meet the requirements of 3.4.2 and 3.4.3
after testing in accordance with 4.19.
3.5 Finish. Unless otherwise specified (see 6.2), generating system shall be painted in
accordance with the manufacturer s standard practice, with outer coat of black or olive drab
enamel (see 6.3) on all exterior surfaces, except electrical connections and exposed shaft surfaces
(see 4.6.2).
3.6 Identification of product.
3.6.1 Marking. Unless otherwise specified (see 6.2), generating system shall be marked
in accordance with standard commercial practice (see 4.6.2).
3.6.2 Nameplate. Generating system shall have a nameplate attached to alternator frame
in conspicuous location so that plate may be easily read when generating system is installed in
vehicle. Nameplate shall contain the following minimum information (see 4.6.2):
GENERATING SYSTEM DC
60 A 28 VOLTS
MAXIMUM RATED SPEED - 10 000 RPM
SPECIFICATION MIL-PRF-46795
SERIAL NUMBER
NATIONAL STOCK NUMBER (NSN)
MANUFACTURER S NAME OR IDENTIFICATION CODE
U.S.
3.7 Safety. The generating system shall be free from defects involving rotating parts,
burrs or sharp edges, and electrical shock which may result in injury of personnel (see 4.6.2).
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.3).
b. Conformance inspection (see 4.4).
c. Control tests (see 4.5).
4.2 Inspection conditions. Unless otherwise specified (see 6.2), all inspections shall be
conducted under the following standard (room) ambient conditions:
a. Temperature: 77 + 15F (25 + 8.3C).
7



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.