INCH-POUND
MIL-DTL-62576B
30 September 1998
SUPERSEDING
MIL-PRF-62576A
13 March 1997
DETAIL SPECIFICATION
REGULATOR, ENGINE GENERATOR
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a solid state regulator utilizing electronic devices to
regulate the voltage and current of the 28 volt (V), direct current (dc) generator (see 6.1).
1.2 Classification. The solid state regulators are of the types listed below:
Type I
- Regulator (Drawing 11631857), to operate with 28 V,
25 ampere (A), dc generator.
Type II
- Regulator, Single Current Limit (Drawing 12257823), to
operate with 28 V, 300 A, dc generator.
Type III
- Regulator, Dual Current Limit (Drawing 11672403), to operate
with 28 V, 300 A, dc generator.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which
may be of use in improving this document should be addressed to: U.S. Army Tank-automotive
and Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000, by using
the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of
this document, or by letter.
AMSC N/A
FSC 2920
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business