MIL-DTL-62576B
3.7.4 Shock. The regulator shall not be damaged nor performance degraded after
exposure to shock levels in accordance with MIL-STD-202, method 213B, condition A, or
equivalent (see 4.4.1), encountered during regulator operation (see 4.8.4).
3.7.5 Corrosion resistance. The regulator shall evidence no corrosion that would
adversely affect performance after being subjected to a salt spray corrosion test specified in
ASTM B117 for 200 hours (see 4.8.5).
3.7.6 Fungus resistance. The regulator shall not support microbial growth that would
adversely affect performance after being exposed to fungi for 90 days (see 4.8.6).
3.7.7 Waterproofness. The regulator shall show no evidence of leakage nor performance
degradation after being subjected to the tests specified in 4.8.7.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.2).
b. Conformance inspections (see 4.3).
4.2 First article inspection. Unless otherwise specified (see 6.2), the Government shall
select four regulator assemblies produced under the production contract for first article
inspection. The selected regulators shall be subjected to the first article tests specified in table I
and in the order listed in table II. Approval of the first article sample by the Government shall not
relieve the contractor of his obligation to supply assemblies that are fully representative of those
inspected as a first article sample. Any changes or deviation of the production units from the first
article sample shall be subject to the approval of the contracting officer (see 3.1).
4.3 Conformance inspections.
4.3.1 Sampling. Sampling requirements, if any, shall be specified in the contract (see 6.2).
4.3.2 Examination. For examination purposes, defects shall be classified as listed in
table III.
4.3.3 Tests. Samples selected in accordance with 4.3.1 shall be subjected to the
conformance tests as specified in table I, and in the order listed in tables IV and V.
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business