MIL-DTL-62576B
ASTM A653
- Standard Specification for Sheet Steel, Zinc Coated
(Galvanized) (Galvanealed) by the Hot Dip Process.
ASTM A924
- Standard Specification for General Requirements for
Sheet Steel, Metallic-Coated by the Hot Dip.
ASTM B117
- Standard Practice for Operating Salt Spray (Fog)
Apparatus (DoD Adopted).
ASTM G21
- Standard Practice for Determining Resistance of
Synthetic Polymeric Materials to Fungi
(DoD Adopted).
(Application for copies of ASTM publications may be obtained from the American Society
for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
GENERAL MOTORS CORPORATION
GM 9540P
- Accelerated Corrosion Test.
(Copies of GM publications may be obtained from General Motors Corporation,
c/o Global Engineering, 15 Inverness Way, Englewood, CO 80112.)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.2 Materials. Materials shall be as specified herein, and on applicable drawings,
standards and specifications. When the material used is not specifically covered in any of the
referenced documents, it shall withstand the temperature range encountered within the component
for which it is intended for use. There shall be no change in physical or chemical properties
resulting in calibration or operation that fall outside the limits specified herein (see 4.4.3).
3.2.1 Dissimilar metals. Except where necessary to complete an electrical circuit, contact
between dissimilar metals, which would encourage galvanic action, shall be avoided.
3.2.2 Finishes. All exterior surfaces of the regulator, except for the electrical connections
and mating surfaces on the mounting bracket, shall be cleaned, treated, and painted (see 4.4).
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business